BVNXV - AIRBLOWN ASPHALT TYPE III

Product Identification

Product ID:AIRBLOWN ASPHALT TYPE III
MSDS Date:06/18/1987
FSC:5610
NIIN:00N051056
MSDS Number: BVNXV

Responsible Party
SAN JOAQUIN REFINING CO INC
BAKERSFIELD, CA 93388
US

Emergency Phone: 805-327-4257

Info Phone: 805-327-4257

Cage: 7E948

Contractor
SAN JOAQUIN REFINING CO INC
BAKERSFIELD, CA 93388 US

Telephone: 805-327-4257

Cage: 7E948

Ingredients

ASPHALT OXIDE; (ASPHALT)

CAS: 64742-93-4

Fraction By Weight: >99%

OSHA PEL N/K

ACGIH TLV: N/K


FERRIC CHLORIDE (SARA III)

CAS: 7705-08-0

RTECS: LJ9100000

Fraction By Weight: <0.5%

OSHA PEL 1 MG/M3 (FE)

ACGIH TLV: 1 MG/M3 (FE)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN:COOL MATL IS NOT EXPECTED TO
CAUSE IRRITATION. THERMAL BURNS MAY RESULT FROM CONTACT W/HOT MATL.
INGEST:NOT EXPECTED TO BE ACUTELY TOXIC. INHAL:FUMES FROM HOT MATL
MAY BE UNPLEASANT & MAY PR ODUCE NAUSEA & IRRITATION OF UPPER
RESPIRATORY TRACT. INHALATION OF HIGH CONCENTRATIONS MAY CAUSE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DIZZINESS, HEADACHE OR NAUSEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . INGEST:DO NOT INDUCE VOMITING,
CALL MD. INHAL:REMOVE PERSON TO FRESH AIR IF RESPIRATORY DISCOMFORT
O CCURS. SKIN:IF SPLASHED ON SKIN, COOL W/WATER. DO NOT USE
SOLVENTS OR THINNERS TO REMOVE. IT CAN BE REMOVED USING PETROLEUM
JELLY.

Fire Fighting

Flash Point Method:COC
Flash Point:>450F,>232C
Extinguishing Media:FOAM, WATER FOG, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . SEE HAZARDOUS DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CLEAN UP USING ABSORBENT MATERIAL, SUCH AS
EARTH OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID FIRE, SPARKS, OPEN FLAME.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:IF OPERATING CONDITIONS CREATE AIRBORNE
CONCENTRATIONS WHICH EXCEED EXPOSURE STANDARD, USE OF NIOSH/MSHA
APPROVED RESPIRATOR FOR ORGANIC VAPORS OR AIR SUPPLIED BREATHING
EQUIPMENT IS RECOMMENDED.
Ventilation:USE ADEQUATE VENT TO KEEP AIRBORNE CONCENTRATIONS OF THIS
MATL BELOW ADEQUATE EXPOSURE STANDARD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:AVOID SKIN CONTACT W/HOT MATERIAL BY WEARING
PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:PRODUCE CARBON MONOXIDE.

Chemical Properties

Boiling Pt:B.P. Text:>650F,>343C
Spec Gravity:1.02 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:BLACK, SEMI-SOLID.

Stability

Stability Indicator/Materials to Avoid:YES
MAY REACT W/STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUST FORMS CARBON DIOXIDE &
WATER VAP & MAY PRDCE OXIDES OF SULFUR & NITROGEN. INCOMPLETE
COMBUST CAN (SUPDAT)

Disposal

Waste Disposal Methods:OBSERVE FEDERAL, STATE & LOCAL REGULATIONS
COVERING CHEMICAL WASTE SPILLS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.